Dynamic - Firm -Set, Modified Transitional Pressure Sensitive Adhesive

ONLY AVAILABLE FOR SALE WITH PURCHASE OF THE FLOORING

When it comes to ultimate adaptability for numerous flooring types, Dynamic holds the market. Breaking all the rules, this revolutionary product saves time with its instant access for light traffic. Dynamic provides the superior bond-strength of a fully cross-linked adhesive, while temporarily retaining PSA-like surface tack.APPROVED FLOORING TYPES

• - RESILIENT: Linoluem, Modular (LVP, LVT, woven, rigid core [dryback], SVT, VCT, VET), Rubber (crumb, sheet, tile), Sheet (fiberglass, heterogeneous, homogeneous), Stair Treads (rubber, vinyl)
• - CARPET: Broadloom (6-ft vinyl-backed, Action-Back, jute-back, double-stick - carpet-to-cushion & cushion-to-substrate, hot-melt-backed, HP-& vinyl-backed, non-vinyl-backed patterned, polyurethane, rubber-backed, unitary & unitary Action-Back, woven-backed), Modular (hard-backed, soft-backed, walk-off)
• - WOOD: Cork (cork-backed hard surface, underlayment)

APPROVED SUBSTRATES & SURFACES:

• • APA underlayment grade plywood and OSB
• • Association grade particleboard
• • Cement backer board
• • Cementitious and anhydrite screeds
• • Concrete and radiant heated subfloors that do not exceed 85°F (30°C)
• • Existing well-bonded non-cushion-backed vinyl, tile and sheet flooring
• • Fully secured cork underlayments
• • Gypsum and lightweight concrete (primed with TAYLOR 2025, Zephyr® or Enhance®)
• • Terrazzo (properly prepared with all waxes and surface finishes removed)

SUBSTRATE TESTING

• RH - 99% [ASTM F2170]
• pH - 5-12 [ASTM F710]
• MVER - 12 lbs [ASTM F1869]

PRECAUTIONARY NOTE: • This product does not form a moisture vapor barrier and will not protect flooring from moisture damage. • Resistant to heavy rolling loads. • Resistant to point loads. • Backrolling adhesive with a 3/8” nap roller to provide an even adhesive film is required in areas subject to heavy rolling loads and or point loads. • Does not prevent indentations of the flooring in areas subject to heavy rolling loads or heavy point loads.

APPROXIMATE COVERAGE ( Coverage is approximate and may vary depending on porosity of substrate and the angle at which the trowel is held.)

- 1/16” x 1/32” x 1/32” U Notch - 220 sq ft/gal

- 1/16” x 1/16” x 1/16” Sq Notch - 150 sq ft/gal

- 3/8” Short Nap Paint Roller - Up to 350 sq ft/gal

*It is the sole responsibility of the contractor/installer to determine the proper porosity of the subfloor, apply the correct amount of adhesive for the job conditions and ensure that all instructions, procedures and practices are strictly adhered to.